Business Highlights / New Holland and Lancaster County, Pennsylvania

Business highlight: New Holland’s test farm is part of the factory

New Holland Agriculture’s 341-acre Lancaster County campus shows how manufacturing, product validation, training and outdoor operating land can function as one property system.

# Business highlight: New Holland’s test farm is part of the factory

New Holland Agriculture’s Lancaster County campus shows why an industrial property cannot always be understood by measuring the building alone.

The company’s current site describes a 341-acre campus in New Holland that includes a 700,000-square-foot manufacturing facility and a 150-acre test farm.[1] Engineering, research and development, product validation, manufacturing, sales and marketing are located within the same broader operation.[1]

For an owner-user making large equipment, the land outside the plant can be production infrastructure.

The campus connects development, production and validation

New Holland identifies the property as its Hay and Forage Center of Excellence and North American headquarters. Its current page says the plant produces 30 models of balers, forage harvesters and other hay tools for markets around the world.[1]

The Pennsylvania governor’s office independently described the same campus in 2024 as 341 acres with a 150-acre test farm and a 700,000-square-foot manufacturing plant.[2] The state account also identified product engineering and technical training as part of the Lancaster County operation.[2]

Lancaster County Magazine’s 2024 plant-tour feature adds a view of the production sequence. It describes a tour beginning with raw metal and ending with completed agricultural equipment, with employees, robotics and laser technology contributing to the work.[3]

Together, the sources show a connected operating system:

  1. Product engineering
  2. Research and development
  3. Raw-material processing
  4. Fabrication and assembly
  5. Product validation
  6. Outdoor field testing
  7. Training
  8. Sales and marketing support

The article does not establish the private route of any particular machine or the current capacity of each department. It does show why the campus must support more than factory-floor production.

The test farm occupies meaningful operating land

A 150-acre test farm is roughly 44 percent of a 341-acre campus.

That calculation is only a scale comparison:

150 acres divided by 341 acres = approximately 44 percent

It does not describe the farm’s exact boundaries, utilization or value. It illustrates that outdoor validation space is not a minor leftover area in the published campus figures.

A manufacturer evaluating property should ask whether its version of a test farm is hidden inside another land requirement. Depending on the product, validation space might mean:

  1. A paved equipment yard
  2. A test track
  3. A secure outdoor assembly area
  4. A load-testing zone
  5. A wash or inspection pad
  6. A demonstration area
  7. A noise or vibration buffer
  8. A place to operate equipment under realistic conditions

Calling all of that acreage “excess land” can understate its operating role.

Product validation changes site selection

A building can fit the machines used to manufacture a product and still fail the business if the finished product cannot be tested safely.

Before buying or leasing an industrial property, an equipment manufacturer should document:

  1. The largest finished unit
  2. Required turning radius
  3. Surface strength and drainage
  4. Slope and terrain needed for testing
  5. Noise, dust and lighting impacts
  6. Separation from employees, visitors and neighboring properties
  7. Security for prototypes and customer equipment
  8. Weather limitations
  9. Fueling, charging, washdown or maintenance needs
  10. The route between final assembly, testing and shipment

The land-use review should also confirm that testing and outdoor storage are permitted. A parcel may have enough area but place critical activity inside setbacks, stormwater facilities, protected areas or required buffers.

Adjacency can shorten the correction loop

The value of placing engineering, manufacturing and validation on one campus is not simply convenience. It can shorten the distance between finding a problem and correcting it.

Consider a hypothetical manufacturer that must send a prototype 20 miles to an off-site test location and then return it for adjustment. If one round trip consumes two employee hours and occurs three times each week:

2 hours multiplied by 3 trips = 6 employee hours per week

Across 48 working weeks:

6 hours multiplied by 48 weeks = 288 employee hours per year

This example does not estimate New Holland’s operation. It demonstrates why site design should include the correction loop, not only initial production.

A nearby test area may also reduce transport permits, loading events, weather exposure and coordination delays. Those benefits must be weighed against the cost of land, site maintenance and approvals.

A large campus still needs internal logistics

A 341-acre site creates its own movement problem. Raw steel, components, work in process, completed machinery, employees, visitors and service vehicles cannot all use the same paths without planning.

An owner-user considering a campus should map:

  1. Inbound truck routes
  2. Material receiving and inspection
  3. Employee and visitor parking
  4. Internal forklift or tugger movement
  5. Oversized product routes
  6. Outdoor staging
  7. Test-area access
  8. Emergency access
  9. Snow storage
  10. Future expansion areas

Lancaster County Magazine reports that the public factory tour follows a route of nearly one mile.[3] That is a visitor path, not a production-flow measurement, but it gives useful scale to the operation.

At that size, a poor internal handoff can consume time repeatedly. Buildings, yards and test areas need to be planned as one network.

Training space belongs in the property plan

The state’s 2024 account identified a certified apprenticeship connected to agricultural-equipment service, while Lancaster County Magazine described a training center that used virtual-reality tools for prospective welders.[2][3]

Training is often treated as office space that can be added later. In manufacturing, it may need:

  1. Safe access to production equipment
  2. Welding or technical booths
  3. Ventilation and power
  4. Classroom space
  5. Lockers and personal protective equipment
  6. Separation between trainees and live production
  7. Room for equipment demonstrations
  8. Expansion capacity for new processes

A workforce plan can therefore affect the real-estate plan. The right building supports both current production and the process of teaching people to perform the work.

The property lesson for Lancaster manufacturers

New Holland’s campus is a positive local example of manufacturing, engineering, validation and training occupying one coordinated footprint.

The broader lesson is useful for smaller owner-users too. Start with the entire operating cycle:

  1. Receive the material
  2. Build the product
  3. Test it
  4. Correct it
  5. Train the people
  6. Ship it
  7. Service what comes back

Then identify which steps need building area, yard area, specialized land or proximity to other departments.

A property is not oversized merely because every acre is not under roof. For some manufacturers, the outdoor test area is as essential as the production line.

Sources & further reading

How does this affect your property?

Bring your questions about buying, leasing or owning commercial space.

Find business space · Sell or lease a property · Industrial and flex space

Talk with Zach