Learn commercial real estate / Lancaster County, Pennsylvania

NNN exterior lighting: separate the electric bill from maintenance and replacement

Exterior lighting can create separate NNN charges for electricity, routine service, lift access, controls and capital replacement. This guide shows how to map fixtures, inspect after dark and define each cost before an outage or upgrade.

Exterior lighting is easy to overlook during a commercial-property tour. The fixtures are high, the controls may be hidden and a daytime inspection cannot show how the lot actually performs after dark.

In a triple-net, or NNN, lease, that oversight can turn into several different charges: electricity, routine service, lift-truck access, control replacement, pole or underground-wiring work and a larger fixture-upgrade project. The lease should separate those costs before the first outage or capital proposal.

Start with four different lighting bills

“Exterior lighting” is not one expense. Break it into at least four categories.

1. Electricity

Parking-lot poles, wall packs, canopy lights and security fixtures consume electricity. The charge may appear on the tenant’s direct utility bill, a landlord-controlled common-area meter or a shared operating-expense allocation.

The American Bar Association explains that commercial leases commonly pass through utilities and maintenance, either as a direct charge for a particular premises or as a pro-rata allocation for shared areas. [1]

The lease should identify which meter serves each fixture group and how unmetered common-area use is allocated.

2. Routine maintenance

Routine work can include inspections, cleaning, failed drivers or lamps, loose connections, photocells, timers, contactors and minor wiring repairs.

The party that receives the electric bill is not automatically the party responsible for arranging repairs. One tenant may pay the electricity while the landlord maintains shared poles. Another lease may place both obligations on a single-tenant occupant.

3. Access and service calls

A small component can create a large invoice when the fixture requires special access. Federal lighting guidance notes that exterior maintenance may require a lift truck costing thousands of dollars per visit. It also says poles, trenching and bases can cost substantially more than the fixtures themselves. [2]

That means a useful budget separates the replacement part from mobilization, traffic control, equipment rental and labor.

4. Replacement and improvement

Replacing one failed component is different from changing every fixture to LED, adding controls, replacing poles or repairing underground conductors.

The lease should state whether a system-wide project is:

  1. An owner capital cost.
  2. A recoverable operating expense.
  3. Amortized over a stated useful life.
  4. Recoverable only to the extent it reduces operating costs.
  5. Subject to a cap, exclusion or remaining-term limit.
  6. Treated differently when required by law or caused by a particular tenant.

The NNN label does not answer those questions. The signed definitions, exclusions and capital provisions do.

Map the fixtures before assigning the cost

A lighting plan should identify each fixture group and the area it serves.

For example:

  1. Tenant-entry wall packs.
  2. Shared parking-lot poles.
  3. Loading-dock fixtures.
  4. Driveway and monument-sign lighting.
  5. Canopy lights.
  6. Emergency or egress fixtures.
  7. Decorative facade or landscape lighting.
  8. Fixtures serving a separately controlled yard.

Then record:

  1. The meter or panel.
  2. The control device and schedule.
  3. The party that can change the schedule.
  4. The party that reports outages.
  5. The party that selects the contractor.
  6. The cost-allocation method.
  7. The warranty and expected replacement responsibility.

This fixture map is especially useful at a multitenant center. A restaurant operating late may benefit from a different lighting schedule than an office that closes at 5 p.m. A contractor yard may need coverage in loading and vehicle areas that does not benefit every tenant.

Inspect the property after dark

A daytime tour can confirm fixture locations but not performance.

A separate evening review can reveal:

  1. Dark pedestrian routes.
  2. Glare that makes a field of view harder to see.
  3. Light spilling onto neighboring property.
  4. Failed or cycling fixtures.
  5. Daylight sensors that turn lights on too early or leave them on during the day.
  6. Controls that do not match business hours.
  7. Trees, signs or stored materials blocking illumination.
  8. Bright and dark areas that affect the practical use of parking, loading or entrances.

The federal guidance emphasizes safety first at stairs, doors and places where people and vehicles interact. It also cautions that brighter is not always better and recommends designing for direction, uniformity and maintenance access. [2]

The inspection should document conditions, not substitute for a qualified lighting or electrical assessment.

Local design requirements belong in the project budget

The City of Lancaster’s parking-lot chapter requires lighting for surface parking lots within the chapter’s scope and addresses shielding, photometric plans, illumination targets and fixture placement. It also encourages motion sensors for dimming or extinguishing lights after dark. [3]

That chapter is particularly relevant to new, reconstructed or improved parking lots in the City. It should not be treated as a universal rule for every existing property or every Lancaster County municipality. A project team should confirm the property’s jurisdiction, the work being proposed and the current requirements that apply.

The practical budget implication is broader than the fixture price. A compliant project may require:

  1. A photometric plan.
  2. Electrical design.
  3. Shielded fixtures.
  4. New controls.
  5. Pole, base or trench work.
  6. Permit and inspection costs.
  7. Coordination with trees, utilities and structures.
  8. Nighttime aiming or commissioning.

An inexpensive fixture that produces the wrong distribution, glare or spill can create a more expensive correction later.

A simple energy example

Assume a hypothetical lot has 20 exterior fixtures. Each existing fixture draws 150 watts and operates 4,000 hours per year.

Annual energy use would be:

20 fixtures × 0.150 kilowatts × 4,000 hours = 12,000 kilowatt-hours

At a hypothetical energy rate of $0.14 per kilowatt-hour, the annual energy cost would be:

12,000 × $0.14 = $1,680

Now assume replacement fixtures draw 80 watts while providing an acceptable designed lighting result.

20 fixtures × 0.080 kilowatts × 4,000 hours = 6,400 kilowatt-hours

6,400 × $0.14 = $896

The hypothetical annual energy difference is $784 before demand charges, controls, maintenance, design, installation or financing.

The calculation does not establish that an upgrade is worthwhile. A real decision needs current fixture data, operating hours, utility rates, photometric performance, installed cost, rebates, maintenance history and the remaining lease term. The Department of Energy also notes that automatic controls can reduce energy use and extend fixture life by adjusting light levels when areas are unoccupied. [4]

Do not ignore controls

A new LED fixture can still waste energy if the schedule is wrong.

Exterior systems may use:

  1. Photocells.
  2. Time clocks.
  3. Astronomical clocks.
  4. Occupancy or motion sensors.
  5. Networked controls.
  6. Building-management-system signals.
  7. Manual overrides.

The lease or property procedure should identify who programs the controls and who may override them. It should also require a practical handoff after replacement work so the owner or tenant receives schedules, passwords, drawings and warranty information.

A control failure can be difficult to spot from inside the building. Daytime inspections should include a check for lights that remain on, and nighttime inspections should confirm that required lights turn on and dim as intended.

Negotiate the replacement before it happens

For a tenant, the key questions are:

  1. Are exterior lights part of the premises, the building or common areas?
  2. Who pays electricity?
  3. Who performs routine maintenance?
  4. Are lift, mobilization and traffic-control costs included?
  5. Who pays for vandalism or tenant-caused damage?
  6. Is a system-wide upgrade capital or operating expense?
  7. If recoverable, how is it amortized and is interest added?
  8. Does the tenant receive credit for rebates, warranties or avoided maintenance?
  9. Is the cost inside or outside the operating-expense cap?
  10. What happens if the project occurs near the end of the lease?
  11. Can the tenant review invoices and the allocation worksheet?
  12. Who controls the lighting schedule?

For an owner, the same clarity supports consistent maintenance and fewer disputes. A shared system is difficult to manage if each tenant believes someone else reports outages or pays for service.

A practical due-diligence file

Before lease signing or acquisition, assemble:

  1. A nighttime photo log.
  2. A fixture and pole inventory.
  3. Panel, meter and control information.
  4. Recent electric bills for the relevant meter.
  5. Maintenance invoices and outage history.
  6. Existing photometric plans, if available.
  7. Warranties and product information.
  8. Known underground-wiring or pole-base issues.
  9. Applicable local approvals and standards.
  10. The lease clauses governing utilities, common areas, maintenance and capital work.

Exterior lighting affects access, operations and the customer’s first view of the property after dark. The useful lease language does more than assign “maintenance.” It shows which fixtures serve which areas, how each bill is allocated and how a larger replacement will be approved and recovered.

This article is general commercial-property education, not legal, electrical-engineering, code-compliance or safety advice. The lease, site and proposed work should be reviewed by the appropriate Pennsylvania professionals and local authority.

Sources & further reading

How does this affect your property?

Bring your questions about buying, leasing or owning commercial space.

Find business space · Sell or lease a property · Industrial and flex space

Talk with Zach