Learn commercial real estate / Lancaster County, Pennsylvania

NNN plumbing and water leaks: separate the line, repair, bill and damage

A plumbing leak can create separate bills for water, diagnosis, repair, damage and compliance. This guide maps the utility line, customer line, building system, suite fixtures and drains so an NNN lease can assign each responsibility clearly.

A triple-net, or NNN, lease does not answer who pays when a pipe leaks.

The cost may include wasted water, emergency diagnosis, the plumbing repair, damaged finishes, business interruption, drying and restoration. Those bills can follow different clauses and different physical parts of the property.

The practical solution is to map the water system before signing the lease or before the next leak.

The utility boundary is not the lease boundary

A water utility may divide responsibility between the public system and the customer’s system. A commercial lease separately divides responsibility between the landlord and tenant.

Those are not the same agreement.

Lancaster City Water says it is responsible for the meter itself, while the valves before and after the meter are the customer’s responsibility. [1] The City’s water rules say the utility is not responsible for customer waterlines beyond the end of the utility service line and that the customer’s service line is installed and maintained at the customer’s expense. [2]

Those rules describe the utility-customer relationship for properties within the applicable service and regulatory area. They do not, by themselves, decide whether a landlord or tenant ultimately bears a cost under a commercial lease.

A landlord may be the utility’s customer and then allocate a permitted expense to tenants. A tenant may hold the direct account but still have a lease claim concerning a landlord-controlled building system. The signed lease and the physical cause both matter.

Divide the water system into five zones

Do not use one phrase such as “tenant maintains plumbing” for the entire system. Identify at least five zones.

1. Public main and utility-controlled service

This includes the public distribution system and utility-controlled components. A break in the street may be handled differently from a leak on private property.

The emergency procedure should identify the utility’s reporting number and the building contact who coordinates access and tenant notice.

2. Customer service line

The private or customer side can run from the utility’s point of delivery toward the building and meter arrangement. Repair may require excavation, pavement or landscaping restoration in addition to plumbing work.

The lease should state who investigates a suspected underground leak, who selects the contractor and whether the cost is direct, shared or treated as capital work.

3. Base-building distribution

These are pipes, valves, risers and related components serving the building or more than one premises.

In a multitenant building, it may be impractical for one tenant to control a shared riser. The landlord may need to manage the work even when the lease allows an allocation through operating expenses.

4. Suite fixtures and tenant equipment

Sinks, toilets, faucets, water heaters, production equipment, dishwashing equipment, ice machines and tenant-installed plumbing may be treated differently from shared building lines.

The clause should separate ordinary fixture service from a failure caused by tenant equipment, installation or misuse.

5. Drains and sewer connections

A clogged fixture drain is different from a blocked building main or a damaged sewer lateral. The lease should address diagnosis, cleaning, repair, backups and damage separately.

Cause matters. A blockage attributable to one tenant’s operation may receive different treatment than a failed shared line.

Separate the five cost categories

The first invoice may not be the largest bill.

Water and sewer usage

A leak can increase metered water use and may also affect sewer charges, depending on the applicable rate structure. The party receiving the bill should know how to compare current use with the property’s normal pattern.

DLA Piper’s United States commercial-leasing guide notes that water billing often depends on use. Office and many retail arrangements may treat ordinary lavatory water differently from restaurant or industrial space, where measured actual use is more likely to matter. [3]

That is general national guidance, not a Pennsylvania rule or a standard term for Lancaster leases.

Emergency response and diagnosis

A plumber may need to locate the source, shut down a system, open a wall or floor and determine which component failed. The party authorized to call the contractor should also know the spending limit and notification procedure.

Repair

The repair may involve a valve, fixture, branch line, shared riser, service line, sewer lateral or tenant-installed connection. Each component can follow a different lease clause.

Resulting property damage

Water may damage flooring, drywall, inventory, equipment or another tenant’s space. Repairing the pipe and repairing the resulting damage are separate jobs. Insurance, deductibles, responsibility and claim notice should be reviewed rather than assumed.

Compliance and testing

Some commercial properties have backflow-prevention equipment and testing obligations. Lancaster’s current manual describes customer responsibilities for approved backflow devices, testing, maintenance and records within its service area. [4]

A tenant should not assume that “landlord handles plumbing” includes every inspection or device connected to its particular operation. The applicable utility requirements and lease language need to be compared.

A small flow can become a large monthly number

Assume a hypothetical leak flows at one-half gallon per minute and continues for 30 days.

The water volume would be:

0.5 gallon per minute × 60 minutes × 24 hours × 30 days = 21,600 gallons

That is only the usage volume. It does not price the water, sewer, repair or damage. Those amounts depend on the current rate, account, property and response time.

The Environmental Protection Agency’s commercial-facility guidance shows why detection matters. Its examples include a medium toilet leak at 0.2 gallon per minute wasting about 8,600 gallons per month. [5]

The lesson is not to rely on the size of the visible drip. Compare meter data, investigate unexpected use and establish who receives alerts.

Build a leak-response plan before the emergency

The lease should be supported by a property procedure that answers:

  1. Where is the suite shutoff?
  2. Where is the building or service shutoff?
  3. Who is authorized to operate each valve?
  4. What number is used for the utility and property manager?
  5. Which plumber may be called after hours?
  6. What spending authority applies before approval is required?
  7. How are affected tenants notified?
  8. Who documents the source and damage?
  9. Who contacts the insurer?
  10. Who arranges drying, testing and restoration?
  11. How are invoices separated by cause and work type?
  12. When is the system cleared for normal operation?

Lancaster City Water’s rules require an accessible stop valve on the customer line so occupants can turn off water in case of leaks. [2] The exact permitted operation and location should be confirmed for the property; no one should operate a utility-controlled curb stop without authorization.

Detection is part of maintenance

EPA WaterSense recommends monitoring water use and inspecting places where water is used, including restrooms, kitchens, irrigation, mechanical rooms, cooling towers and laboratory areas. It also identifies flow monitors, surface leak sensors and automatic shutoff devices as possible parts of a detection system. [5]

For a smaller property, detection can start with a simpler process:

  1. Record the normal monthly or weekly water range.
  2. Review bills promptly.
  3. Read accessible meters during closed periods.
  4. Inspect fixtures and mechanical rooms.
  5. Look for wet pavement, soil or unexplained drain flow.
  6. Label shutoffs.
  7. Test the notification chain.
  8. Preserve repair and usage records.

A sophisticated sensor does not help if no one receives the alert or knows who may shut down the system.

Water-intensive tenants need a more detailed map

Restaurants, medical users, food producers, car washes and some industrial operations can have water use that differs sharply from neighboring office or retail tenants.

Before leasing, identify:

  1. Required line size and pressure.
  2. Meter and submeter arrangement.
  3. Sewer capacity and discharge limitations.
  4. Water-heating demand.
  5. Floor drains and cleanouts.
  6. Grease, process or pretreatment systems.
  7. Backflow-prevention requirements.
  8. Equipment shutoffs and leak sensors.
  9. Washdown or sanitation areas.
  10. Responsibility for capacity upgrades.

A prior tenant’s water bill may be irrelevant if the new operation uses different equipment, hours or cleaning processes.

Put the responsibility table beside the rent schedule

For every plumbing component, record:

  1. Who inspects it?
  2. Who performs routine maintenance?
  3. Who calls the contractor?
  4. Who pays a small repair?
  5. Who pays replacement?
  6. Can the cost enter operating expenses?
  7. Is a capital cost amortized?
  8. Who pays for tenant-caused damage?
  9. Who receives warranty or insurance proceeds?
  10. Who pays resulting restoration and the deductible?
  11. What records can the tenant review?
  12. What happens near the end of the lease?

DLA Piper notes that commercial leases often place nonstructural premises repairs on tenants while landlords handle building systems and common areas, potentially subject to operating-expense reimbursement. It also notes that some net leases place broader repair responsibility on the tenant. [3] The exact contract controls.

A due-diligence file for plumbing

Before lease signing or acquisition, request:

  1. A diagram of the service line, meter and major shutoffs.
  2. The water and sewer account structure.
  3. Recent bills and usage history when available.
  4. Known leak and repair history.
  5. Backflow-device records.
  6. Available sewer-lateral information.
  7. Locations of floor drains and cleanouts.
  8. Tenant-installed plumbing and equipment records.
  9. Warranties and contractor information.
  10. The lease clauses for utilities, repairs, capital work, damage and insurance.

The useful NNN clause does more than say who “maintains plumbing.” It connects each pipe and fixture to a service area, response process and billing rule. That clarity cannot prevent every leak, but it can shorten the response and make the resulting invoices easier to evaluate.

This article is general commercial-property education, not legal, plumbing, utility, insurance, environmental or code-compliance advice. Confirm the property, service territory, current rules and signed lease with the appropriate Pennsylvania professionals and utility.

Sources & further reading

How does this affect your property?

Bring your questions about buying, leasing or owning commercial space.

Find business space · Sell or lease a property · Industrial and flex space

Talk with Zach